SmartLoop

Networkable intelligent analogue-addressable fire alarm control panel with 1 loop expandable to 8

The SmartLoop series of analogue addressable fire control panels marks a clear evolution from previous generations. This series has solutions to satisfy all market segments: from small domestic applications requiring 1 loop to large applications requiring 8 loops. At maximum configuration a SmartLoop system can support 30 control panels (arranged in a token-ring) and, if you consider that each control panel can manage up to 8 loops, and that each loop can accommodate as many as 240 devices, it is clearly apparent that the cutting-edge technology of the SmartLoop series has achieved excellence in application flexibility.

The SmartLoop series has been specially designed to provide enhanced features, best-in-class performance, simple end-user operation and trouble-free installation, all with the aim of helping the installer company to improve efficiency. These first-rate features have been made possibile by the appliance of multiprocessor architecture with self-diagnosis features co-ordinated by a 32 bit processor. This impressive hardware podium provides the processing resources necessary to ensure the highest levels of reliability, response speed, ease-of-use, connection simplicity, enhancement opportunities and flexibility. The operational superiority of the SmartLoop system is rooted in the synergy of various stateof- the-art technologies: OpenLoop technology; HorNet token-ring technology; Emergency54 technology and Janus technology (refer to the 'Technologies' section for details). The SmartLoop control panel has 5 supervised outputs for alarm and fault signaling (the efficiency of these outputs is monitored continuously). It can identify and diagnose anomalous conditions and provide an ample spectrum of visual signals: alarm, pre-alarm, fault, early warning, bypass, test, monitor. All system status signaling is indicated on the display and on the system status LEDs. In addition to the supervised outputs, this control panel provides two relays for alarm and fault signaling and also an output for battery shutdown signaling.

If you wish to increase the number of on-panel inputs and outputs, you can install a 6-terminal SmartLoopINOUT expansion board. Each of the SmartLoopINOUT terminals can be set up to operate as either a supervised output; a supervised input or a conventional detector zone. This important feature is yet another innovation pioneered by INIM. These 'three-option' terminals abolish the inflexibility normally found in conventional input/output expansion boards and also allow the control panel to manage zones with conventional detectors. The SmartLoop system provides an RS485 BUS for remote-control Repeater panel connections. Two Repeater models are available: SmartLetUSee/LCD with display; SmartLetUSee/LED with status LEDs. Repeater panels replicate all the fire alarm system data and allow users to access and control the system in accordance with their authorized access level. The RS485 BUS also accepts and manages a fire extinction control panel. Two models are available: SmartLine020-2EXT (sigle channel);SmartLine036-4EXT (single channel). These fire extinction control panels are conventional panels from the SmartLine series and are equipped with a SmartLetLoose/ONE fire extinction board.

All the control panels from the SmartLoop series support the SmartLoop/PSTN board which provides voice and digital dialler functions. Programming the system from the control panel is straightforward and trouble-free thanks to the easy-to-follow instructions on the display. The time-saving Self-Addressing feature (for the loop devices) simplifies the procedure even more. The system can also be programmed using SmartLeague software application (runs under Windows) which offers an easy-to-use graphic interface. This method will allow the installer to program the system on a home or office computer and download the pre-set data at a later time via RS232, USB or Ethernet (for SmartLAN enhanced systems). The SmartLeague's simple 'drag and drop' operations will allow you to enjoy the convenience and ease of configuring the system with the visual help of a virtual system. The right-across-the-range components, reduced-complexity firmware, and optimized remote programming and diagnostic features keep the technicians time on site to a minimum. The SmartLoop fire control panel with its plain language excels in application flexibility. Its versatility and ease of operation makes it perfect for all market segments, from medium commercial applications to large facilities such as hospitals, shopping malls and airports.

 

Features

 

  • Analog-addressable fire control panel
  • 2 loops expandable to 8 for 2080 expandable models; 1 loop on non-expandable 1010 models
  • All models in the SmartLoop series are EN54 Approved
  • Multiprocessor hardware structure
  • 32 bit main CPU
  • OpenLoop Technology
  • HorNet token- ring architecture
  • Supports Emergency54 emergency configuration (CPU redundancy)
  • Manages up to 30 panel token-ring network via the SmartLoop/NET board (accessory item)
  • Easy remote access through SmartLAN board (accessory item)
  • 2 or 4 wire loop connection
  • Supports 240 devices per loop
  • Manages up to 8 remote-control Repeater panels connected to the RS485 Interface
  • Manages power stations on the RS485 BUS
  • Manages a fre-suppression control panel on the RS485 BUS
  • 3 general purpose NAC outputs
  • 1 NAC Alarm output
  • 1 NAC Trouble output
  • 1 dry contact Alarm relay
  • 1 dry contact Trouble relay
  • RS485 BUS for Repeater panel connections (SmartLetUSee/LCD and SmartLetUSee/LED)
  • Manages SmartLine020-4EXT and SmartLine036-4EXT fre extinguishing control panels via RS485 BUS RS485 BUS (maximum wire length between panels 1000m)
  • Manages up to 8 remote-control Repeater panels on the RS485 BUS (maximum wire length between panels 1000m)
  • 1 24 V power supply output for external devices
  • 1 24 V resettable output 
  • Battery shutdown relay for deep discharge conditions
  • RS232 and USB connectors for uploading/downloading data
  • 2000 event buffer
  • Self-enrolling (for loop devices)
  • Self-addressing (for loop devices)
  • Manages conventional detectors (through SmartLoop/INOUT board)
  • Emergency phone call (through SmartLoop/PSTN board)
  • Large backlit alphanumeric display for easy management of Installer/User interface
  • Navigation keys for easy access to menu options
  • Fast keys (Test, Beeper, Silence, Reset, Evacuate, Investigate)
  • Beeper (provides audible signals)
  • User-friendly programming software (runs under Windows)
  • Easy system programming from the control panel
  • Code or key access to Level 2 functions (EN54 compliant)
  • On-board connector for Thermal probe (accessory item).
  • Battery efficiency test
  • Extensive application of SMD reflux technology for higher reliability
  • Metal box
  • Mains power supply 230Vac Vac ± 10%
  • Switching power supply/battery charger 4A @ 27.6Vdc
  • Battery housing for two 17Ah, 12V batteries
  • Dimensions (HxWxD): 480x470x135mm
  • Weight (without batteries): 8Kg
Enea Series

Intelligent addressable analogue detector ENEA series detectors, as a result of advanced technologies based on new-generation microprocessors, represent the most advanced technology that fire detection equipment can offer today. They provide a vast spectrum of options and flexible functions, all configurable from the control panel (Versa++ technology). ENEA series detectors are capable of implementing a sophisticated set of algorithms, custom created by INIM™'s R&D professionals, which ensure unequalled reliability and the highest immunity to false alarms. Thanks to INIM™'s leading-edge LoopMap technology, you can now connect to the control panel by means of a computer or EDRV1000 driver and reconstruct the exact installation topology and obtain an easy-to-use, interactive loop layout map which greatly simplifies and speeds up searches relating to faults and maintenance work. These detectors have passed - with flying colours - all the tests taken at the LPCB test facility, the prestigious English certification service. And, thus hold the right to use this mark in addition to the obligatory CPD certification for the commercialization of fire detectors.

EB0010 Detector base

EB0010 Detector base

Detector base accommodates IRIS and ENEA series detectors, equipped with short-circuit plate which ensures continuity in the event of removal of the detector from the line.
EB0020 Relay base

EB0020 Relay base

Relay base with a single relay which activates when the detector senses an alarm. The relay base allows you to interface the detector with intrusion control panels in domestic applications.

Intelligent addressable analogue detector ENEA series detectors, as a result of advanced technologies based on new-generation microprocessors, represent the most advanced technology that fire detection equipment can offer today. They provide a vast spectrum of options and flexible functions, all configurable from the control panel (Versa++ technology). ENEA series detectors are capable of implementing a sophisticated set of algorithms, custom created by INIM™'s R&D professionals, which ensure unequalled reliability and the highest immunity to false alarms. Thanks to INIM™'s leading-edge LoopMap technology, you can now connect to the control panel by means of a computer or EDRV1000 driver and reconstruct the exact installation topology and obtain an easy-to-use, interactive loop layout map which greatly simplifies and speeds up searches relating to faults and maintenance work. These detectors have passed - with flying colours - all the tests taken at the LPCB test facility, the prestigious English certification service. And, thus hold the right to use this mark in addition to the obligatory CPD certification for the commercialization of fire detectors.

ED100 Optical smoke detector

ED100 Optical smoke detector

The ED100 optical smoke detector is based on the Tyndall effect (diffusion of light) and provides first-rate early warning in the event of fire. It offers wide-spectrum detection of smoke particles generated by the majority of fires. The newly designed optical chamber with sealed upper-part and 500 μm holes diameter mesh insect screen ensure high immunity to false alarms. The sensitivity can be configured to suit a wide range of applications (sensitivity configurable as: 0.08dB/m; 0.10dB/m; 0.12dB/m; 0.15dB/m).
ED200 Heat detector

ED200 Heat detector

The ED200 heat detector can be configured in the following modes: A1R mode (fixed threshold at 58°C with thermovelocimetric detection); B mode (fixed threshold at 72°C); A2S mode (fixed threshold at 58°C); BR mode (fixed threshold at 72°C with thermovelocimetric detection). As a result of high flexibility, this detector is useful in places where the environment is dusty or smoky and the risk of false alarms is high.
ED300 Smoke and Heat detector

ED300 Smoke and Heat detector

The ED300 smoke and heat detector has new smoke and temperature sensing technologies. As a result, this improved reliability detector responds well to all types of fires (especially to fast burning blazing fires involving inflammable liquids, which produce a limited amount of smoke) and is highly immune to false alarms. The ED300 can be set to the sensitivity mode which best suits the application.
EC0020 Intelligent Manual callpoint

EC0020 Intelligent Manual callpoint

  • Addressable callpoint
  • Manual callpoint with resettable element operated by plastic key (included)
  • Warning flag and LED confirms activation
  • Selectable resistence
EC0020 Intelligent Manual callpoint

EC0010E Intelligent Manual callpoint for outdoor installation (IP67)

  • Addressable callpoint
  • Manual callpoint with resettable element. Weatherproof to IP67, suitable for outdoor installation
ES0010RE

ES0010RE Addressable loop-powered sounder

ES0010RE Addressable loop-powered sounder unit in red enclosure. The loop-powered ES0010RE connects directly to the loop. Weatherproof to IP67, suitable for outdoor installation.
ES0020RE

ES0020RE Addressable loop-powered sounder/beacon

ES0020RE Addressable loop-powered sounder/beacon unit in red enclosure. The loop-powered ES0020RE connects directly to the loop. Weatherproof to IP67, suitable for outdoor installation.
ESB010 Sounder base

ESB010 Sounder base

To be installed under EB0010 mounting base. It connects to the remote output of the detector and is powered directly through the loop. The conditions of activation can be configured from the control panel.
ESB020 Sounder base and beacon

ESB020 Sounder base and beacon

To be installed under EB0010 mounting base. It connects to the remote output of the detector and is powered directly through the loop. The conditions of activation can be configured from the control panel.
EM312SR

EM312SR Intelligent input/output module

The EM312SR connects directly to the loop and is equipped with a supervised input (capable of controlling the status of external devices), a supervised output (capable of driving of one or more audible/visual signalling devices) and a voltage free output (capable of driving all types of external devices, for example, electromagnets, etc).
EM110

EM110 Intelligent input module

The EM110 connects directly to the loop and is equipped with a supervised input (capable of controlling the status of external devices).
EU311

EU311 Intelligent micromodule

The EU311 MicroModule, due to its reduced-size, can be housed directly inside the enclosure of the device it controls (callpoint, sounderflasher, beam detector, etc.), it connects directly to the loop and is equipped with a supervised input (capable of controlling the status of a device), a loop-powered output (capable of driving of one audible/visual signalling devices).
SmartLetUSee/LCD-Lite

SmartLetUSee/LCD-Lite

Remote repeater panel equipped with display and user-interface keypad (up to 4 for each control panel)
SmartLetLoose/ONE

SmartLetLoose/ONE

Fire extinction board. Provides control panel with a Fire Extinction Gas control capabilities. Certified CPD- EN12094-1.
SmartLevel

SmartLevel

Power-supply station. Connectable to the RS485 BUS (for supervision and management of the control panel power-supply-station outputs.
SmartLetUSee/LCD-RK

SmartLetUSee/LCD-RK

SmartLetUSee/LCD-RK Remote LCD Repeater panel 19' Rack Mount
SmartLetUSee/LED

SmartLetUSee/LED

SmartLetUSee/LED Remote LED Repeater panel
SmartMimic

SmartMimic

SmartMimic Synoptic panel board
SmartLoop/2L

SmartLoop/2L

SmartLoop/2L OpenLoop expansion board
SmartLoop/INOUT

SmartLoop/INOUT

SmartLoop/INOUT Input and output expansion board
SmartLoop/NET

SmartLoop/NET

SmartLoop/NET SmartLoop HorNet network board
SmartLoop/PSTN

SmartLoop/PSTN

SmartLoop/PSTN PSTN Voice and digital dialler
SmartLAN

SmartLAN

SmartLAN Ethernet interface for Internet via TCP-IP and UDP
SmartLAN/SF

SmartLAN/SF

SmartLAN/SF Ethernet interface for Internet via TCP-IP
SmartLoop/PRN

SmartLoop/PRN

SmartLoop/PRN On-front Printer Module